New arrival
Overview
POSSIBILITY
1983 BRISTOL 41.1
Solomons MD
POSSIBILITY is a two owner Bristol 41.1 (Hull # 43) center cockpit model with 2 staterooms and 2 heads! She has been very well maintained by her knowledgeable owners. Now is the time to make owning a beautiful Bristol 41.1 a real POSSIBILITY !
Specifications
Dimensions
Details
Accommodation
Performance
Weight
Capacities
Propulsion
Photos34 images
Additional Details
ACCOMODATIONS
The entire INTERIOR is beautiful teak joinery with semi gloss finish, solid teak and holly cabin sole. There is full AC & DC lighting throughout. All port lights with curtains, deck hatches with screens and canvas covers. Central reverse cycle air conditIoning throughout. 12 VDC fans are located throughout the vessel. Large ports replaced with acrylic lenses. Opening ports cleaned & serviced.
The FORWARD STATEROOM has a large V-Berth with filler cushion; storage lockers with cane sliding doors outboard and over the V Berth port and starboard side; a large hanging locker on the starboard side with a shelf and cabinet.. Two additional drawers and storage bins under V-Berth. This cabin has two privacy doors, one for the forward head and for the main salon.The forward head is equipped with a sink, shower, toilet, large mirror, and three lockers. It also has two privacy doors; one for the forward cabin and one for the main salon.
The MAIN SALON has a convertible L-Shaped sitting area on the port side which opens up to form a double bed. To the starboard side is a full length sitting area, which also opens up to a double bed. In the center is a teak drop leaf table with hidden bar and cutlery tray. Above both sitting area are large storage lockers with cane sliding doors, large bins both behind and below. Dickinson Newport diesel cabin heater mounted on the starboard salon bulkhead forward and Weems and Plath ships clock & barometer w/temperture/humidity mounted on the port salon bulkhead forward.
A NAVIGATION STATION is located on the port side facing outboard; includes a navigation chart table with storage, a shelf for charts, and a custom hinged panel facing the seat with VHF and chartplotter/radar mounted therein. Ample room for future electronics is provided. On the bulkhead is the AC and DC electric panels with multiple circuit breakers, and electrical distribution controls. Additional storage is below the navigation seat. Also a wet locker is behind the companionway ladder. Two Nicro Solar Vents provide constant ventilation below.
The GALLEY, located to the starboard side, has a deep double stainless steel sink inboard, pressure hot and cold water, a manual fresh water pump with carbon filter, and counter tops on both sides of the galley. There is ample counter-space for meal prep. On the outboard side is a gimballed three burner stainless steel propane stove with oven, a top loading 12 vlt battery-driven refrigerator/icemaker. DC fan on bulkhead with custom shelvings for galley items. An additional deck hatch over the galley installed for cross ventilation.
The OWNER'S STATEROOM, accessible via passageway through the galley,has a queen size twartship berth, port and starboard hanging lockers, storage drawers, storage bins with cane doors and a custom mirror in the center. A large storage area is available under the berth. Harwich ships clock and barometer mounted on aft bulkhead. The AFT HEAD is on the port side, which is complete with a sink, shower, toilet, vanity, and two storage areas
GALLEY
The GALLEY is located to starboard with excellent galley storage and counter top space. Custom shelving for galley items and 12V bulkhead mounted fan.
- Shipmate SS 3-Burner Propane Stove w/Oven
- (2) 12 volt battery-driven refrigeration systems
- SEA FROST BDS 12 VDC system installed in 2015/2016 to replace a legacy system which used an engine-driven compressor pump
- Adler-Barbour system installed in 2000.
- Deep Double SS Sinks w/Pressure H&C
- Manual FW Pump w/Carbon Filter
HULL & DECK
POSSIBILITY is stunning with her AwlCraft Donegal Green painted hull. All Exterior Teak is treated with CETOL Marine finish. Several Bristol Yacht Company options include...with cast SS and Aluminum fittings. Encapsulated (same color as topsides) teak rub rail w/SS striker, SS rail around back of cockpit for additional back support and split boot top.
- Swim Ladders (2) One at stern and one at boarding gates.
- St. Croix Rotating Stainless Steel Davits with Winch and Handle
- Cockpit Stainless Steel Railing
- Full enclosure Dodger and Bimini framed canvas. Sailing awning & screens provided. Dodger replaced (2023).
- Cockpit cushions replaced (2023).
- Edson Stowable Cockpit Teak Table
- Outboard Motor Mount
GROUND TACKLE/DOCKING:
- Custom dual anchor channel and spinnaker strong point on bow stemplate
- Maxwell VW-10 Vertical Rope/Chain windlass (2021)
- Danforth, CQR, Fortress & dinghy anchors. Anchor snubber. 125' (est.) 5/16" BBB chain, 150' (est.) pleated 3/4" nylon rode.
- Maxwell Rope/Chain Vertical windlass (2022)
- Set of Docking Lines
- Fenders
- Miscellaneous Lines
SAFETY:
- Life Sling
- USCG Safety pkg.
- Flag & pennant halyard
- Jim Buoy (Horseshoe) with mounting bracket.
MISC.
- All thru-hulls replaced with GROCO units. (2018/2019).
- Centerboard cable replaced. (2019)
- Edson Pedestal at helm - steering cable and all pulley bearing pins replaced 2014
- Original steel Emergency Tiller replaced with aluminum
ADDITIONAL INFO:
Last bottom job was in the Spring, 2023 at Dickerson Boatyard, in conjunction with topsides painting. Paint was Interlux ACC (Ablative Copolymer).
Rudder post packing service performed by Deltaville Boatyard in Spring 2013.
SAILS & RIGGING
- ProFurl 420 (2013)
- Rolly Tasker Ocean-rated Furling Jib (2013). Serviced 2025.
- Rolly Tasker Ocean-rated Mainsail (2013). Serviced 2025. Includes Dutchman Sail Flaking System.
- Sobstad Staysail. Never used.
- Rolly Tasker Asymmetrical Tri-radial Spinnaker with ATN Sleeve (2013). Never used.
- Sobstad Mainsail, spare. Never Used.
- All Standing Rigging replaced, including lifelines (2013).
- All Chainplates replaced (2013).
- All Running Rigging replaced (2013), and selectively thereafter.
- Deck-mounted Forespar Adjustable Tri-Pole.
- Garhauer Adjustable Hydraulic Boom Vang.
- Strong Marine Sail Track Slide System installed (2013)
MECHANICAL
- REPOWERED in 2005 Yanmar 4JH4E
- KM35 Transmission
- 780 hours (est).
- All hosing fuel & water lines replaced.
- All engine, fuel and water lines replaced. Entire exhaust hose circuit as well.
- Propeller - 19" Max-Prop 3-Blade Feathering. Refurbished 2021. Fixed 19" 3-Blade as spare.
- All FW tank vent lines replaced (2026).
- Propeller 19” Max-Prop 3-Blade Refurbished 2021
- Engine oil and filters changed annually, dates marked on filters, Fall 2025 Rotella T^ full synthetic
- Last transmission oil/fluid change Spring 2024
- Impeller changed annually Fall 2025
- Yanmar alternator LR180-03C 80 amp w/built in regulator
- Engine Raw water intake hose replaced 2014
- Entire exhause hose replaced 2018
- Fuel polished 2023
PLUMBING & SANITATION
- GROCO Paragon w. pressure tank and gauge
- AFT -HEAD Raritan Manual head with LECTRO-SCAN unit
- FORWARD HEAD -Airhead Composting toilet
- Raritan 6 gallon 1700 Series Water heater-110 shore power and engine driven
- the original fiberglass holding tank, integral to the hull, located beneath the main salon port settee is capped
Tanks
- Fuel:100 gal
- Fresh Water:180 gal
ELECTRONICS
- Garmin Echo Map Plus Model A03346 Installed 2020
- Garmin Wind/Speed/Depth
- ICOM 506 with integrated AIS (receiver only) is mounted at Nav Station Panel, Remote ICOM Command Mic at pedestal. AIS data is displayed on Garmin Chartplotter
- Autopilot status- Quadrant mounted hydraulic ram installed - All legacy SeaTek electronics and cables have been removed
- Mast rewired for New windex 2023 and Garmin annenometer
- MiSea Anchor Light
ELECTRICAL
- Lifeline AGMs. 2 Gp 31 Engine Bank (2024), 4 Gp 31 House Bank (2015).
- Replaced all cables, battery
- Added Victron monitor & VDC fuse.
- Xantrax TruCharge 2 TC4012, 40 amp 12 volt
- No inverter
TENDER
- 10’ AB Inflatable w. Aluminum Floor, Air pump, integral hoisting harness
- 5.0 HP Mercury Propane w. tank, lines & mounting bracket
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Interested in this Bristol?
Send us a message about this vessel and our experienced brokers will get back to you within 24 hours with detailed information, availability, and next steps.


